BIXOLON SRP-350plusIII - Manual (Page 25)

Rev. 1.03 - 25 -
SRP-350/352plusIII
4. Specifications
Printing Method
Thermal transfer printing
Dot Density
SRP-350plusIII: 180 dpi (7dots/mm)
SRP-352plusIII: 203 dpi (8dots/mm)
Printing Width
3 inches 72 mm
2 inches 48 mm
Roll Width
3 inches 79.5±0.5 mm
2 inches 57.5±0.5 mm
No. of Characters per Line (Default Value)
SRP-350plusIII
: 42 (Font A), 56 (Font B), 56 (Font C)
SRP-352plusIII
: 48 (Font A), 64 (Font B), 64 (Font C)
Printing Speed
SRP-350plusIII: Max. 300 mm/sec
SRP-352plusIII: Max. 270 mm/sec
Receiving Buffer Size 4K bytes
※ NOTE
Printing speed may become slightly slower depending on the data transmission speed
and the combination of commands.
Supply Voltage
SMPS Input Voltage 100~240 VAC
Frequency 50/60 Hz
SMPS Output Voltage 24 VDC
Environment
Condition
Temperature
Operating: 0 ~ 45 ℃
Storage: -20 ~ 60 ℃
Humidity
Operating: 10 ~ 80 % RH
Storage: 10 ~ 90 % RH
Paper excluded
Life Span
Printer Head *) 150 Km
Auto Cutter 1,800,000 cuts
MCBF Printer Mechanism *) 70,000,000 lines
*) The specifications were determined based on operation at normal temperature using
designated paper on default settings. They are subject to change depending on
temperature or printing level.
*) The specifications were tested according to standard reliability. If you want to test the
product to determine its life cycle, please contact us for more details and comply with the
standard reliability for testing.
* These values may vary with environment temperature, printing level, etc.
* The switch is the disconnecting device. Turn off switch from any hazard.