6 recommended papers, 7 structure of 2 inches specification, Rev. 1.03 – BIXOLON SRP-350plusIII User Manual
Page 19
Rev. 1.03
- 19 -
SRP-350/352plusIII
1-6 Recommended Papers
- TF50KS-
E (Paper Thickness: 65μm): Nippon Paper Industries Co., Ltd.
- PD
160R (Paper Thickness: 75μm): New Oji Paper Mfg. Co., Ltd.
-
P350 (Paper Thickness: 62μm): Kansaki Specialty Paper, Inc. (USA)
※ CAUTIONS
Use of papers other than those recommended above may damage TPH or degrade the
printing quality and our company is not responsible for the damage caused by non-
recommended papers. If you have to use other products, we recommend that you use
papers with a similar level of quality to the recommended ones.
1-7 Structure of 2 inches specification.
※ NOTE
This setting can be changed from VMSM Utility.
※ CAUTIONS
The changes for 2 inches specification should be applied to the following components as
well.
Screw
2 inches partition
2 inches roller