beautypg.com

Loopback test – D-Link DI-308 User Manual

Page 98

background image

DI-308 ISDN Remote Router

90

IP Address – This is the IP Address of the device that the router will attempt to

reach. The router will check its routing table and try to locate the IP Address.

Count – The number of pings (packets) that will be sent. A value of 0 will cause

pings to be sent continuously.

Delay (10ms) – The amount of time in 10 millisecond intervals between each

ping in the Count.

Start Ping Test - Press or to begin the test.

Loopback Test

The loopback test is used to test the path ISDN network between your phone
company’s switch and the router.