D-Link DI-308 - Manual (Page 101)

DI-308 ISDN Remote Router
93
Software Update
New routing software can be downloaded from a TFTP server.
If you do not have a TFTP server on your LAN, you can use the included Router
Configuration Utility to upgrade the software. This Windows-based utility has a
built-in TFTP emulator enabling you to use the computer (connected to the LAN and
running the Configuration Utility) to upload the new software to the router.
This is the same Software Update configuration information contained under the
PROM System Configuration’s Software Update screen. The parameters are
described in that section.
Performing a System Restart after configuring these settings begins the software
update procedure.
System Restart
The system restart function enables you to reset the DI-308 without powering off.
Some setting changes require a system restart in order for them to take effect.