D-Link DES-1526 - Manual (Page 55)

48
Figure 32. PoE Status
POE Port Status:
Selected “POE Port Status” to configure the PoE Port setting.
To configure the settings, click on the ID parameter to enter the
selected port .
Figure 33. PoE Port Setting
Poe Enable: Select to enable or disable the PoE function.
Power limit: This function allows you to manually set the port
power current limitation to be given to the PD. To protect the
DWL-P1526 and the connected device, the power limit function
will disable the PoE function of the port when the power is
overloaded. Select “<5W”, “<10W”, “<14W” and “Auto” for the
power limit. “Auto” will follow the classification from the PD
power current.
POE System Setting:
Selected “POE System Setting” to configure the PoE System
setting.