D-Link DES-1526 - Manual (Page 49)

42
Delete Group: To delete previously defined SNMP Community
group, press the “Delete Group” button. The Delete SNMP
Community configuration window will pop up; check the delete
dialog box. Press “Apply” to delete the selected SNMP
Community Group.
Figure 26. Delete SNMP Community group
Modify Group: To modify a previously defined SNMP Community
group, click on the ID parameter to enter to the selected SNMP
Community Group to configure its community name and
community enable. Press “Apply” to save change of the SNMP
Community Group.
Figure 27. Modify SNMP Community group