D-Link DES-1526 - Manual (Page 30)

23
u Gateway: Shows the Gateway set of the device.
View Trap
The Trap function can receive the events that happen on the Web
Management Switch in the Monitor List.
There is a light indicator behind the “View Trap” button. When
the light is green, it means that there is no trap transmitted, and
when it is red, it means that a new trap has been transmitted,
reminding us to view the trap. (Figure 9)
Figure 9. View trap button
When the “View Trap” button is clicked, a Trap Information
window will pop up. It will display the trap information including
the Symbol, Time, Device IP, and the Event occurred. (Figure 10)
The symbol “ ” represents the trap signal. This symbol will
disappear after you review and click on the event record.
Figure 10. Trap information