Optoma EX855 - Manual (Page 51)

English
5
User Controls
When making a direct connection from your computer to the projector
Step 3: To open Network Connections, click
Start, click Control Panel, click
Network and Internet Connec-
tions, and then click Network Con-
nections. Click the connection you
want to confi gure, and then, under
Network Tasks , click Change
settings of this connection.
Step 4: On the General tab, under This
connection uses the following
items, click Internet Protocol
(TCP/IP), and then click “Proper-
ties”.
Step 5: Click Use the following IP
address, and type in as below:
1) IP address: 192.168.0.101
2) Subnet mask: 255.255.255.0
3) Default gateway: 192.168.0.254
Step 6: To open Internet Options, click IE
web browser, click Internet Options,
click the Connections tab and click
“ LAN Settings...”
Step 7: All items in the Local Area
Network (LAN) Setting window
must be unchecked. Then click
“OK” button twice.
Step 8: Connect a cat5 Ethernet cross-over
cable between the projector and the
computer.
Step : Find an IP Address (92.68.0.00) from LAN function of projector.
Step 2: Select “Apply” and push the “Enter” button. Once the setting is saved, exit the OSD
by pushing “Menu” button.
192.168.0.100