Optoma EX855 - Manual (Page 30)

English
30
User Controls
IMAGE
Display Mode
There are many factory presets optimized for various types of
images.
Presentation: Good color and brightness from PC input.
Bright: Maximum brightness from PC input.
Movie: For home theater.
sRGB: Standardised accurate color.
Blackboard: This mode should be selected to achieve optimum
color settings when projecting onto a blackboard (green).
Classroom: This mode is recommended for projecting in a
classroom.
DICOM SIM.: This display mode simulates the greyscale/gam-
ma performance of equipment used for “Digital Imaging and
Communications in Medicine” (DICOM).
IMPORTANT: This mode should NEVER be used for medical diagnosis, it is for
education/training purposes only.
3D: Recommended setting for 3D mode enabled. Any further
adjustments by the user in 3D will be saved in this mode for
further use.
User: User’s settings.
Brightness
Adjust the brightness of the image.
Press the ◄ to darken image.
Press the ► to lighten the image.











N
OTE
3D mode only
supports below
3D sources.
Input source tim-
ing-120Hz frame
sequential:
1. 1280x720
120Hz
2. 1024x768
120Hz
3. 800x600
120Hz
