Optoma HD50 - Manual (Page 48)

48
User Controls
Setup | HDMI Link
Settings
HDMI Link
Enable/Disable the HDMI Link function. The Inclusive
TV, Power on Link, and Power off Link options will only
available if the setting is set to On.
Inclusive TV
If the setting is set to “Yes”, both TV and projector will be
automatically turned off at the same time. To prevent both
devices to be turned off at the same time, set the setting to
“No”.
Power On Link
CEC power on command.

Mutual: Both projector and CEC device will be turned on
simultaneously.

PJDevice: The CEC device will be turned on only after
the projector is switched on.

DevicePJ: The projector will be switched on only after
the CEC device is turned on.
Power Off Link
If the setting is set to “On”, both HDMI Link and projector
will be automatically turned off at the same time. Set to
“Off”, both HDMI Link and projector will be not automatically
turned off at the same time.
N
ote
N
ote
• When
Power Mode
(Standby) is
set to Active,
DevicePJ
will be active
when the
projector is in
standby
• Some HDMI
Link functions
may not
operate,
depending on
the connected
product’s
design and
compliance
with the
HDMI CEC
standard.