Optoma HD50 - Manual (Page 38)

38
User Controls
Display | 3D
3D Mode
DLP Link: Select DLP Link to use optimized settings for
DLP Link 3D Glasses.
VESA 3D: Select VESA 3D to use optimized settings for
VESA 3D-based 3D images.
Off:SelectOfftodisable3DMode.
3D Format
Auto:Whena3Didentificationsignalisdetected,the
3D format is selected automatically. (For HDMI 1.4 3D
sources only)
SBS: Display 3D signal in Side-by-Side format.
Top and Bottom: Display 3D signal in Top and Bottom
format.
Frame Sequential: Display 3D signal in Frame Sequential
format.
2D3D: 2D signal transform 3D signal.
3D2D
Press ◄ or ► to select projector display 3D content in 2D
(Left) or 2D (Right) without using 3D glasses to enjoy 3D
content. This setting can also be used for dual projector
passive 3D installations.
3D: Display 3D signal.
L (Left): Display the left frame of 3D content.
R (Right): Display the right frame of 3D content.
N
ote
N
ote
• 3D settings
are saved
after
adjustment.
• 3D Format
is only
supported on
3D Timing on
page 62.
• “3D Format”
and “3D
Mode:Off“
are only
supported on
non-HDMI
1.4a 3D
timing.