Optoma HD50 - Manual (Page 20)

20
User Controls
On-screen Display Menus
The Projector has multilingual On-screen Display menus
that allow you to make image adjustments and change a
variety of settings. The projector will automatically detect
the source.
How to operate
1. To open the OSD menu, press “Menu” on the Remote
Control or Control Panel.
2. When OSD is displayed, use ▲ or ▼ keys to select any
item in the main menu. While making a selection on a
particular page, press ◄ or ► or “ENTER” key on the
Remote Control or “Enter” on the Control Panel to enter
sub menu.
3. Use ▲ or ▼ keys to select the desired item and adjust the
settings by ◄ or ► key.
4. Select the next item to be adjusted in the sub menu and
adjust as described above.
5. Press “ENTER” key on the Remote Control or “Enter” on
the Control Panel or “Menu” to confirm, and the screen will
return to the main menu.
6. To exit, press “Menu” again. The OSD menu will close and
the projector will automatically save the new settings.
Main Menu
Setting Sub Menu