Optoma W401 - Manual (Page 56)

56
English
User Controls
OPTIONS |
Advanced
Direct Power On
Choose “On” to activate Direct Power mode. The projector will
automatically power on when AC power is supplied, without
pressing the “ ” key on the projector control panel or on the
remote control.
Auto Power Off (min)
Sets the countdown timer interval. The countdown timer will start,
when there is no signal being sent to the projector. The projector
will automatically power off when the countdown has finished (in
minutes).
Sleep Timer (min)
Sets the countdown timer interval. The countdown timer will start,
with or without a signal being sent to the projector. The projector
will automatically power off when the countdown has finished (in
minutes).
Quick Resume
On: If the projector is accidentally turned off, this feature `
allows the projector to be instantly powered on again, if
selected within a period of 100 seconds.
Off: The fan will start cooling the system immediately when `
user turns off the projector.
Power Mode (Standby)
Eco.: Choose “Eco.” to save power dissipation further < 0.5W. `
Active: Choose “Active” to return to normal standby and the `
VGA out port will be enabled.
When Power mode ™
(Standby) is set
to Eco (<0.5W),
the VGA output,
Audio pass-through
and RJ45 will be
deactivated when
the projector is in
standby.
The value of sleep
™
timer will be reset to
zero after the pro-
jector power off.
Direct Power On
Auto Power Off (min)
Sleep Timer (min)
Quick Resume
Power Mode (Standby)
OPTIONS
Off
Exit
Advanced
Off
Active