Optoma W401 - Manual (Page 42)

42
English
User Controls
“3D sync. Invert” func- ™
tion wouldn’t save the
setting. It will set to
“Off” when powers on
and changes source.
3D Format is only sup- ™
ported on 3D Timing
on page 68.
“3D Format” is only ™
supported on non-
HDMI 1.4a 3D timing.
DISPLAY | 3D
3D Mode
DLP-Link: Select “DLP-Link” to use optimized settings for DLP `
Link 3D Glasses. (refer to page 16).
VESA 3D: Select “VESA 3D” to use optimized setting for VESA `
3D Glasses. (refer to page 16).
3D -> 2D
3D: Display 3D signal. `
L (Left): Display the left frame of 3D content. `
R (Right): Display the right frame of 3D content. `
3D Format
Off: Press the “Off” to disable 3D format conversion. `
SBS: Display 3D signal in “Side-by-Side” format. `
Top and Bottom: Display 3D signal in “Top and Bottom” format. `
Frame Sequential: Display 3D signal in “Frame Sequential” `
format.
3D Sync. Invert
Press the “On” to invert left and right frame contents. `
Press the “Off” for default frame contents. `
3D Mode
3D -> 2D
3D Sync. Invert
DISPLAY
DLP - Link
Exit
3D
3D
Off
3D Format AUTO