Optoma W401 - Manual (Page 55)

55
English
User Controls
OPTIONS |
Lamp Settings
Lamp Hours
Display the projection time.
Lamp Reminder
Choose this function to show or to hide the warning message
when the changing lamp message is displayed.
The message will appear 30 hours before suggested replacement
of lamp.
Lamp Mode
Bright: ` Choose “Bright” to increase the brightness.
Eco.: ` Choose “Eco.” to dim the projector lamp which will lower
power consumption and extend the lamp life.
Eco+: When Eco+ mode is activated, the brightness level of `
the content is automatically detected to significantly reduced
lamp power consumption (up to 70%) during periods of
inactivity.
Lamp Reset
Reset the lamp hour counter after replacing the lamp.
When ambient ™
temperature is over
40°C in operat-
ing, the projector
will switch to Eco
automatically.
“Lamp Mode” can ™
be indipendently set
for 2D and 3D.
Lamp Hours
Lamp Reminder
Lamp Mode
Lamp Reset
OPTIONS
Exit
Lamp Settings
Off
Bright