Optoma EH415 - Manual (Page 53)

English
53
User Controls
Options | Advanced
Direct Power On
Enable or disable Direct Power On.

On—the projector powers on automatically when AC
power is supplied.

Off— the projector must be powered on as normal.
Signal Power On
Enable or disable Signal Power On.

On—the projector powers on automatically when an
active signal is detected.

Off— disable the power on trigger by active signal is
detected.
1. Only available on Standby Mode is Active.
2. If projector is turned off with keeping input the signal
source (the last image source showing on screen), it will
not re-start unless:
a. Terminate the last image source and input any signal
source again.
b. Unplug and re-plug the projector power again.
3. Signal power on will ignore “source lock” setting.
N
ote
N
ote