Optoma EH415 - Manual (Page 14)

14
Installation
Powering On/Off the Projector
Powering On the Projector
1. Remove the lens cover.
2. Connect the power cord to the projector.
3. Turn On the connected devices.
4. Ensure the Power LED is flashing and then press the
power button to turn On the projector.
The projector’s startup logo screen displays and connected
devices are detected. If the connected device is a laptop,
press the appropriate keys on the computer keyboard to
switch the display output to the projector. (Check the user
manual of the laptop to determine the appropriate Fn key
combination to change display output.)
See Security Settings on page 40 if security lock is
enabled.
5. If more than one input device is connected, press the
“Source” button sequentially to switch between devices.
For direct source selection, see page 20.
N
ote
N
ote
Turn on the
projector first and
then select the
signal sources.
N
ote
N
ote
Due to the
difference in
applications for
each country,
some regions may
have different
accessories.
N
ote
N
ote
12V OUT is a
programmable
trigger.