Setup | lan settings, User controls – Optoma EH415 User Manual
Page 46
46
User Controls
Setup | LAN Settings
If the connection is successful, the OSD display will show
the following dialogue box.
Network State—to display network information.
DHCP:
On: Assign an IP address to the projector from the DHCP
server automatically.
Off: Assign an IP address manually.
IP Address—Select an IP address
Subnet Mask—Select subnet mask number.
Gateway—Select the default gateway of the network
connected to the projector.
DNS—Select DNS number.
Apply—Press “ENTER” to apply the selection.
MAC Address—Read only.
N
ote
N
ote
Network sub-
menu can only
be accessed if a
network cable is
connected.