Mercedes-Benz 2010 CL Class - Manual (Page 341)

Function Recommendation/Notes
3 Manual fan speed
adjustment, driver’s
side ( Y page 342)
4 Front defroster i Keep this setting selected only until the
windshield or the side windows are clear
again.
( Y page 343)
5 Air recirculation i Only use this function for a short time,
e.g. in a tunnel. Otherwise, the windows
can fog up due to lack of fresh air.
( Y page 343)
6 Climate control on/
off i Switch on/off the climate control
system.
( Y page 340)
7 Residual heat/
ventilation i With the engine turned off, it is possible
to continue to heat or ventilate the
interior.
( Y page 344)
8 Rear window
defroster ( Y page 344)
9 Manual fan speed
adjustment,
passenger side ( Y page 342)
a Temperature
control, passenger
side i Set the temperature to 72‡ (22†). ( Y page 341)
b Air distribution and
air volume,
passenger side
(automatic mode) i Switch on the automatic mode. The
indicator lamp in button à comes on.
( Y page 341)
Notes on climate control system
i If you have the air distribution and air
volume automatically controlled, you can
adjust the temperature, footwell
temperature and air flow. The following
basic settings are recommended:
R
Automatic air distribution control
(
Y page 341)
R Temperature: 72‡ (22†) ( Y page 341)
R
Footwell temperature: 0 ( Y page 197)
R
Air flow: focused ( Y page 197)
The climate control system is operational
whenever the engine is running. You can
operate the climate control system in either
the automatic or manual mode. The system
cools or heats the interior depending on the
selected interior temperature.
It can only function optimally when you are
driving with the windows and the tilt/sliding
sunroof closed.
Climate control system
339
Controls in detail
216_AKB; 3; 90, en-US
d2ureepe,
Version: 2.11.8.1
2009-05-15T11:47:50+02:00 - Seite 339
Z