TOYOTA 2010 Camry - Manual (Page 506)

484
6-1. Specifications
Engine
Fuel
Model 2AR-FE 2GR-FE
Type
4 cylinder in line,
4 cycle, gasoline 6 cylinder V type,
4 cycle, gasoline
Bore and stroke
3.54 × 3.86 in.
(90.0 × 98.0 mm)
3.70 × 3.27 in.
(94.0 × 83.0 mm)
Displacement 152.2 cu.in. (2494 cm
3
) 210.9 cu.in. (3456 cm
3
)
Drive belt tension Automatic adjustment
Valve clearance
(engine cold)
Automatic adjustment
NOTICE
■ Drive belt type (2.5 L 4-cylinder [2AR-FE] engine only)
The high strength drive belt is used for the generator side drive belt.
When replacing the drive belt, use Toyota genuine drive belt or equivalent
high strength drive belt. If the high strength drive belt is not used, durability
of the belt may become less than expected. The high strength drive belt is a
belt with Aramid core which has higher strength compared to usually avail-
able belts with PET or PEN core.
Fuel type Unleaded gasoline only
Octane rating 87 (Research Octane Number 91) or higher
Fuel tank capacity 18.5 gal. (70 L, 15.4 Imp. gal.)