TOYOTA 2010 Camry - Manual (Page 429)

405
4-3. Do-it-yourself maintenance
4
Mainten
ance an
d ca
re
Checking and replacing fuses
If any of the electrical components do not operate, a fuse may have
blown. If this happens, check and replace the fuses as necessary.
Vehicles with smart key system: Turn the “ENGINE START
STOP” switch OFF.
Vehicles without smart key system: Turn the engine switch
OFF.
Open the fuse box cover.
Engine compartment
Push the tab in and lift the lid
off.
Under the driver’s side instrument panel
Remove the lid.
After a system failure, see “Fuse layout and amperage rat-
ings” (
→P. 407) for details about which fuse to check.
STEP 1
STEP 2
STEP 3