Installation, Caution – Nexen Smart Valve 964508 User Manual
Page 5

2
FORM NO. L-20353-C-0302
INSTALLATION
The SmartValve should be located near the pneumatic product being controlled and can be mounted horizontally or
vertically. While the SmartValve is a sealed product and protected from the ingress of water and dust, the SmartValve
must not be mounted such that the exhaust port is hit directly with the spray from a wash down hose or similar item.
Also, allow enough clearance around the SmartValve to facilitate removal of the cover and the hold down screws.
NOTE: For best performance and reliability, use a regulated clean air supply and a filter that measures 20 micron or less.
CAUTION
Mount the SmartValve in a shock and vibration free area with an ambient temperature
of less than 140°F [60°C] and more than 32°F [0°C].
FIGURE 2 INSTALLATION DIMENSIONS
4.05 In.
[102.8 mm]
6.18 In.
[157 mm]
1.21 In.
[30.7 mm]
4.24 In.
[107.8 mm]
4.850 In.
[123.19 mm]
5.30 In.
[134.6 mm]
.23 In.
[5.8 mm]
.46 In.
[11.8 mm]
.257 In. Dia. 2X
[6.52 mm]
.27 In.
[6.8 mm]
2.28 In.
[58 mm]
Fittings accept 1/4” Diameter plastic tubing.
Fittings for 6 mm Diameter plastic tubing
are also included.
Tubing diameter indicated here