Pilz PMI 509 User Manual
Page 46

Attachment
Operating Manual PMI 5
1002241EN05
46
ver
Command used to show information on the device
Syntax: ver [/d] [/a] [/hw /p /o /l /s /r /c]
Parameter
Description
/d
Data mode, display without description, e. g.:
..
PMI 515
10000007
264515
..
/a
show all information
/hw
outputs the hardware version
/p
outputs the processor type
/o
outputs the build version of the operating system
/l
outputs the bootloader version
/t
outputs the device type
/s
outputs the serial number
/r
outputs the order number
/c
outputs the chip set version
xcopy
Command used to copy files and directory structures
Syntax: xcopy [h | y | g | s | x | t
Parameter
Description
y
Messages are suppressed
g
Use dialog windows
s
Start copying automatically, only makes sense with
g
x
End copy dialog automatically, only makes sense
with g
t
Set window title (default setting: xcopy), only
makes sense with g
c
Delete target directory first
absolute path of the source directory
absolute path of the target directory