Pilz PMI 509 - Manual (Page 44)

Attachment
Operating Manual PMI 5
1002241­EN­05 44
regexp Commend used to export a registration key including subkeys to a file
(*.reg)
Syntax: regexp /r /f [/c] [ALL]
Parameter Description
/r Registration key that is to be exported
/f Name of the target file
/c converts REG_MUI_SZ to REG_SZ
/ALL Parameter used to export the whole registration to
a file (*.reg)
regimp Command used to import a registration file (*.reg)
Syntax: regimp [/temp] [/info]
Parameter Description
File name
/temp temporarily saved, the present registration is not
overwritten
/info Status information on the success/failure of the ac­
tion
regsave Command used to permanently save the current registration
Syntax: regsave
regsvrce Command used to register ActiveX module (*.ocx, *.dll)
Syntax: RegsvrCE [/u] [/n] [/s] [/i[:cmdline]] dllname
Parameter Description
/u Deregisters the server
/n "DllRegisterServer" is not called up, the parameter
must be used with "/i"
/s suppresses messages on the display
/i transmits an optional command line (cmdline) to
DllInstall; when "/i" is combined with "/u", DllUnin­
stall is executed
dllname DLL name