Pilz PIT m3.1p - Manual (Page 30)

7.1 Select operating mode
7 Operation
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
7-2
7.1 Select operating mode 7100 Select operating mode 7- BA umschalten BAWS
An operating mode can only be selected if the corresponding actuator
is recognised.
Once an operating mode is selected, the corresponding semiconductor
output OM1 ... OM4 and special service mode (OM5) are activated.
The selected operating mode is displayed via the back-lit button and is
dual-channel monitored via a safety control system.
You can switch between the individual operating modes OM1, OM2,
OM3 and OM4 as required.