Pilz PSSnet GW1 MOD-EtherCAT - Manual (Page 32)

Operation
Operating Manual PSSnet GW1 MOD-EtherCAT
1002692-EN-02
32
Operation
Display elements
Status LEDs on the front provide information on the module's activity.
LED on
LED flashes
LED flashes briefly
1
LED flashes once periodically
2
LED flashes twice periodically
3
LED flashes tree times periodically
LED off
LED display symbols
Display elements for device diagnostics
LED LED status Meaning
Pwr/Stat Green Fault-free operation
Red Internal error (module error) or IP address
conflict
No supply voltage or device is defective
LED LED status Meaning
Link/Trf Green Link present, 100 Mbit/s
Green Traffic present, 100 Mbit/s
Red Max. 15 sec. after power-up: Still waiting
for answer from DHCP Server.
After more than 15 sec.: The default IP ad-
dress 192.168.0.1 is already used in the
network. In this case the module cannot
be reached via Ethernet.
Red No Modbus/TCP connection
Red Incorrect Register range (during Client re-
quest)
Orange Link present, 10 Mbit/s
Orange Traffic present, 10 Mbit/s
No link
7
7.1
7.1.1