Pilz PSSnet GW1 MOD-EtherCAT - Manual (Page 29)

Commissioning
Operating Manual PSSnet GW1 MOD-EtherCAT
1002692-EN-02
29
Spring-loaded terminals:
} Minimum conductor cross section on field connection terminals = 0.2 mm 2 (AWG24),
} Maximum conductor cross section on field connection terminals = 2.5 mm 2 (AWG12),
} Terminal points per connection: 2,
} Stripping length: 9 mm.
Terminals
The plug-in terminals for the inputs and outputs are not supplied with the system. You can
select between spring-loaded terminals and a screw connection.
Terminal configuration
Module supply Terminal configuration X4
4-pin female connec-
tor
1 +24 V infeed for module supply
1 2 3 4 2 0 V infeed for module supply
3 Not connected
4 Functional earth
Terminal configuration
Interfaces
The following minimum requirements must be met:
} Ethernet standards (min. Category 5) 100BaseTX
} Double-shielded twisted pair cable for industrial Ethernet use
} Shielded RJ45 connectors (industrial connectors)
RJ45 interface
RJ45 socket, 8-pin PIN Standard Crossover
8 1
1 TD+ (Transmit+) RD+ (Receive+)
2 TD- (Transmit-) RD- (Receive-)
3 RD+ (Receive+) TD+ (Transmit+)
4 n.c. n.c.
5 n.c. n.c.
6 RD- (Receive-) TD- (Transmit-)
7 n.c. n.c.
8 n.c. n.c.
Interface assignment of RJ45 socket
n.c. = not connected
6.2.2
6.3
6.4
6.4.1