beautypg.com

Features, Assembly operation, Symbols – Ryobi RP4011 User Manual

Page 2

background image

2

FEATURES

PRODUCT SPECIFICATIONS

Battery Pack Voltage ................................................................ 4 V DC
Laser Certifications ...............................................<1mW, 630-660nm
Water Resistance Rating ............................................................. IP52*

*IP Rating: Specifies the environmental protection the product enclosure pro-

vides. An IP Rating of 52 denotes protection against harmful deposits of dust and
can withstand water spray from
15 degrees from vertical. The water resistance
rating applies only when the battery cap is installed.

KNOW YOUR LASER DISTANCE MEASURE

See Figure 1, page 13.
The safe use of this product requires an understanding of the informa-

tion on the product and in this operator’s manual. Before use of this

product, familiarize yourself with all operating features and safety rules.

LCD DISPLAY

The LCD display shows the measurement for distance from the device

to the target surface, with icons for calculations of volume and area.

MEASUREMENT FROM DIFFERENT REFERENCE

POINTS

The instrument has different measurement locations, from the front of

the instrument, the rear of the instrument and the auxiliary distance from

the rear of the instrument. Icons on the LCD indicate which surface of

the tool the measurements are being taken from.

LASER ACCURACY

The laser distance measure is accurate to ± 1/8 in. at 98.43 ft.

LEVEL

A reference bubble level on the side of the laser distance measure allows

the operator to see that the unit is level when projecting the laser beam.

UNPACKING

This product has been shipped completely assembled.

Carefully remove the product and any accessories from the box.

Make sure that all items listed in the packing list are included.

WARNING:

Do not use this product if it is not completely assembled or if any parts

appear to be missing or damaged. Use of a product that is not prop-

erly and completely assembled could result in serious personal injury.

Inspect the product carefully to make sure no breakage or damage

occurred during shipping.

Do not discard the packing material until you have carefully inspected

and satisfactorily operated the product.

If any parts are damaged or missing, please call 1-800-525-2579 for

assistance.

PACKING LIST

Laser Distance Measure
Carry Pouch
Operator’s Manual

WARNING:

If any parts are damaged or missing do not operate this product until

the parts are replaced. Use of this product with damaged or missing

parts could result in serious personal injury.

ASSEMBLY

OPERATION

WARNING:

Do not attempt to modify this product or create accessories not

recommended for use with this product. Any such alteration or

modification is misuse and could result in a hazardous condition

leading to possible serious personal injury.

WARNING:

Do not allow familiarity with products to make you careless. Re-
member that a careless fraction of a second is sufficient to inflict
serious injury.

WARNING:

Always remove battery pack from the product when you are

assembling parts, making adjustments, cleaning, or when not in use.

INSTALLING/REMOVING BATTERY PACK

See Figure 2, page 13.

Push the bottom of the battery cover in the direction indicated by

the arrow. Remove the battery cover.

Insert the battery pack into the instrument. Make sure the raised rib

on the battery pack aligns with the groove in the compartment. Be

sure contacts on the battery pack engage properly with contacts in

the compartment.

To replace the battery cover, insert the tab into the slot on back of

the unit. Press the end of the cover until it closes. Make sure it is

securely fastened before operating the laser distance measure.

To remove the battery pack, remove the cover and pull the battery

pack from the instrument.

SYMBOLS

Some of the following symbols may be used on this product. Please study them
and learn their meaning. Proper interpretation of these symbols will allow you to
operate the tool better and safer.

SYMBOL / NAME

DESIGNATION/ EXPLANATION

Safety Alert

Indicates a potential personal injury hazard.

Laser Exposure Laser radiation — avoid direct eye exposure.

Read
Operator’s
Manual

To reduce the risk of injury, user must read and
understand operator’s manual before using this
product.

Wet Conditions
Alert

Do not expose to rain or use in damp locations.

Recycle
Symbol

This product uses lithium-ion (Li-ion) batteries.
Local, state or federal laws may prohibit disposal
of batteries in ordinary trash. Consult your local
waste authority for information regarding avail-
able recycling and/or disposal options.

V

Volt

Voltage

Hz

Hertz

Frequency (cycles per second)

W

Watt

Power

Direct Current

Type or a characteristic of current