MagnaFlow INFINITI G35 Stainless Cat-Back System PERFORMANCE EXHAUST User Manual
MagnaFlow For the car
Step 1:(Carefully read all instructions before
installation) Begin removal of your OEM exhaust
system by unfastening the two bolt flange located
behind the catalytic converter. Remove all welded
hangers from the rubber insulators. The exhaust can
now be removed. Retain all fasteners and insulators
as they will be needed to mount your new
MAGNAFLOW performance exhaust system.
Step 2: Install your new system by first mounting the
Resonator Assembly to the catalytic converter outlet
using the OEM fasteners Next slip the Mid-Pipe
Assembly onto the Resonator Assembly and loosely
secure using the supplied 2.50" clamp and fitting the
hanger into the rubber insulator. Install the Muffler
Assembly in a similar fashion.
Step 2: With all components mounted loosely, adjust
the system for overall aesthetics and clearance of
frame & bodywork. (MAGNAFLOW recommends at
least 1/2" of clearance between the exhaust system
and any body panels to prevent heat-related body
damage or fire.)
Step 3: Once a final position has been chosen for the
new system, evenly tighten all fasteners from front to
rear. The supplied band clamps must be VERY tight
to properly align the pipes and prevent leaks
(Approximately 40ft-lbs).. Inspect all fasteners after
25-50 miles of operation and retighten if necessary
Mufflers, Converters,
Systems and Tips
INSTALLATION INSTRUCTIONS
16861
2003-2006 Infiniti G35 Sedan 3.5L
Warning: When working on, under, or around
any vehicle exercise caution. Please allow the
vehicle's exhaust system to cool before removal,
as exhaust system temperatures may cause
severe burns. If working without a lift, always
consult vehicle manual for correct lifting
specifications. Always wear safety glasses and
ensure a safe work area. Serious injury or death
could occur if safety measures are not followed.
** Magnaflow Performance Exhaust recommends professional
installation on all their products
Magnaflow Performance Exhaust - 22961 Arroyo Vista Rancho Santa Margarita, CA
92688
Main #: 1-800-990-0905 Technical Support: 1-800-959-9226 ext 4500
08/02/12
Rev: 000
Muffler
Assy
Mid-Pipe
Assy
Resonator
Assy
2x 2.50"
Clamps