MagnaFlow CADILLAC CTS Stainless Cat-Back System PERFORMANCE EXHAUST - Manual

Step 1: (Carefully read all instructions before
installation) Temporarily remove any OEM cross
braces before removal of the OEM exhaust system.
Loosen the OEM clamps and unbolt the flanges
behind the catalytic converters. Do not damage or
discard the OEM fasteners and rubber insulators as
they will be used to mount the new Magnaflow
system.
You should now be able to remove the system by
disengaging the welded hangers from the rubber
insulators.
Step 2: Begin installation of the new Magnaflow
system by bolting the new Tru-X cross-over pipe to
the catalytic converters using the OEM fasteners.
Leave all clamps and fasteners loose for final
adjustment of the complete system. Install the
Resonator assembly, extension pipe assembly and
the mufflers using the supplied 2.25" clamps and by
fitting the welded hangers of the Mufflers into the
OEM rubber insulators.
Step 3: With all components mounted loosely, adjust
the system for overall aesthetics and clearance of
frame & bodywork. (MAGNAFLOW recommends at
least 1/2" of clearance between the exhaust system
and any body panels to prevent heat-related body
damage or fire.)
Step 4: Once a final position has been chosen for
the new system, evenly tighten all fasteners from
front to rear. The supplied band clamps must be
VERY tight to properly align the pipes and prevent
leaks (Approximately 40ft-lbs). Inspect all fasteners
after 25-50 miles of operation and retighten if
necessary.
Mufflers, Converters,
Systems and Tips
INSTALLATION INSTRUCTIONS
15073
2011 Cadillac CTS Coupe - V6 3.6L
Warning: When working on, under, or around
any vehicle exercise caution. Please allow the
vehicle's exhaust system to cool before removal,
as exhaust system temperatures may cause
severe burns. If working without a lift, always
consult vehicle manual for correct lifting
specifications. Always wear safety glasses and
ensure a safe work area. Serious injury or death
could occur if safety measures are not followed.
** Magnaflow Performance Exhaust recommends professional
installation on all their products
Magnaflow Performance Exhaust - 22961 Arroyo Vista Rancho Santa Margarita, CA 92688
Main #: 1-800-990-0905 Technical Support: 1-800-959-9226 ext 4500
May 11, 2012
Rev: 000
TRU -X CROSS-OVER
ASSY.
6x 2.25" CLAMP
RESONATOR ASSY.
D/S
RESONATOR ASSY.
P/S
EXTENSION PIPE
ASSY. D/S
EXTENSION PIPE
ASSY. P/S
MUFFLER ASSY.
D/S
MUFFLER ASSY.
P/S