beautypg.com

MagnaFlow FORD TRUCK F-150 Stainless Cat-Back System PERFORMANCE EXHAUST User Manual

Step 1, Step 2, Step 3

background image

Step 1:

(Carefully read all instructions

before installation)

. To remove the OEM

exhaust system, loosen the clamp attaching the
muffler to the catalytic converter extension pipe.
Disengage the welded hangers on the muffler
and tailpipe from the OEM rubber insulators,
then remove the muffler and tailpipe (Do not
damage the OEM rubber insulators, as they will
be re-used to mount the new system.) You may
need to cut the tailpipe approximately 1" behind
the muffler to aid in removal.

Step 2:

Install the new inlet pipe using the

OEM fasteners. If you have a Crew Cab truck
install the Extension Pipe using the supplied
2.50" Clamp. Install the threaded hanger and
rubber insulator as shown in Fig 1, then Install
the Muffler Assembly fitting the welded hangers
into the rubber insulator and fasten it to the inlet
pipe using the supplied 2.50" clamp. Leave all
clamps and fasteners loose for final adjustment
of the complete system. .

Step 3:

With all components mounted loosely,

adjust the system for overall aesthetics and
clearance of frame & bodywork.
(MAGNAFLOW recommends at least 1/2" of
clearance between the exhaust system and any
body panels to prevent heat-related body damage
or fire.)

Step 4:

Once a final position has been chosen

for the new system, evenly tighten all fasteners
from front to rear. The supplied band clamps
must be VERY tight to properly align the pipes
and prevent leaks (Approximately 40ft-lbs). You
can now connect the battery, start the vehicle,
and check for leaks. Inspect all fasteners after
25-50 miles of operation and retighten if
necessary.


Mufflers, Converters,

Systems and Tips

INSTALLATION INSTRUCTIONS

15001

2011 Ford F-150 3.7L EC-CC

Warning: When working on, under, or around
any vehicle exercise caution. Please allow the
vehicle's exhaust system to cool before removal,
as exhaust system temperatures may cause
severe burns. If working without a lift, always
consult vehicle manual for correct lifting
specifications. Always wear safety glasses and
ensure a safe work area. Serious injury or death
could occur if safety measures are not followed.

** Magnaflow Performance Exhaust recommends professional
installation on all their products

Magnaflow Performance Exhaust - 22961 Arroyo Vista Rancho Santa Margarita, CA 92688

Main #: 1-800-990-0905 Technical Support: 1-800-959-9226 ext 4500

12/5/12
Rev: 000

Inlet Pipe

Muffler
Assy

2.50"
Clamp

Hanger

Fig 1.

Crew Cab
Extension Pipe