MagnaFlow AUDI TRUCK Q7 Stainless Cat-Back System PERFORMANCE EXHAUST - Manual

Step 1: (Carefully read all instructions before
installation) Begin removal of the OEM exhaust
by loosening the band clamps behind the
catalytic converters. Working front to rear
disengage the welded hangers from the rubber
insulators and remove system. Do not discard or
damage the OEM fasteners and rubber insulators
as they will be reused to mount the new system.
Step 2: Install the new Front Muffler Assembly
by inserting the inlet ends into the OEM band
clamps at the catalytic converter. Locate the
welded hangers to the rubber insulators. Leave
all clamps and fasteners loose for final
adjustment of the complete system. Install the
two Mid Pipes by fastening them to the Front
Muffler Assembly using the supplied 2.50"
clamps. Install the Rear Muffler Assembly and
the two Tail Pipe Assymblies in a similar
fashion.
Step 3: With all components mounted loosely,
adjust the system for overall aesthetics and
clearance of frame & bodywork.
(MAGNAFLOW recommends at least 1/2" of
clearance between the exhaust system and any
body panels to prevent heat-related body damage
or fire.)
Step 4: Once a final position has been chosen for
the new system, evenly tighten all fasteners from
front to rear. The supplied band clamps must be
VERY tight to properly align the pipes and
prevent leaks (Approximately 40ft-lbs). Inspect
all fasteners after 25-50 miles of operation and
retighten if necessary.
Mufflers, Converters,
Systems and Tips
INSTALLATION INSTRUCTIONS
15085
2007 Audi Q7 4.2L
Warning: When working on, under, or around
any vehicle exercise caution. Please allow the
vehicle's exhaust system to cool before removal,
as exhaust system temperatures may cause
severe burns. If working without a lift, always
consult vehicle manual for correct lifting
specifications. Always wear safety glasses and
ensure a safe work area. Serious injury or death
could occur if safety measures are not followed.
** Magnaflow Performance Exhaust recommends professional
installation on all their products
Magnaflow Performance Exhaust - 22961 Arroyo Vista Rancho Santa Margarita, CA 92688
Main #: 1-800-990-0905 Technical Support: 1-800-959-9226 ext 4500
June 25, 2012
Rev: 000
Front Muffler Assy.
6X 2.50 Clamps
D/S Mid Pipe
P/S Mid Pipe
Rear Muffler Assy.
D/S Tail Pipe Assy.
P/S Tail Pipe Assy.