MagnaFlow SUBARU BRZ Stainless Cat-Back System PERFORMANCE EXHAUST User Manual
MagnaFlow For the car
Step 1:(Carefully read all instructions before
installation) Begin removal of your OEM exhaust
system by unbolting the flange behind the catalytic
converter. Remove all welded hangers from the
rubber insulators. The exhaust can now be removed.
Retain all fasteners and insulators as they will be
needed to mount your new MAGNAFLOW
performance exhaust system.
Step 2: Install your new system by first mounting the
Resonator Assembly to the catalytic converter outlet
using the OEM fasteners. Next slip the Mid-pipe onto
the Resonator Assembly and loosely secure using
the supplied 2.50" clamp and fitting the hangers into
the OEM rubber insulators. Install the Muffler
Assembly in a similar fashion using the supplied
2.50" clamp and fitting the hangers into the
insulators.
Step 2: With all components mounted loosely, adjust
the system for overall aesthetics and clearance of
frame & bodywork. (MAGNAFLOW recommends at
least 1/2" of clearance between the exhaust system
and any body panels to prevent heat-related body
damage or fire.)
Step 3: Once a final position has been chosen for the
new system, evenly tighten all fasteners from front to
rear. The supplied band clamps must be VERY tight
to properly align the pipes and prevent leaks
(Approximately 40ft-lbs). U-bolt clamps should be
tightened to approximately 30-35ft-lbs. Inspect all
fasteners after 25-50 miles of operation and retighten
if necessary
Mufflers, Converters,
Systems and Tips
INSTALLATION INSTRUCTIONS
15157
2013 Scion FR-S 2.0L
Warning: When working on, under, or around
any vehicle exercise caution. Please allow the
vehicle's exhaust system to cool before removal,
as exhaust system temperatures may cause
severe burns. If working without a lift, always
consult vehicle manual for correct lifting
specifications. Always wear safety glasses and
ensure a safe work area. Serious injury or death
could occur if safety measures are not followed.
** Magnaflow Performance Exhaust recommends professional
installation on all their products
Magnaflow Performance Exhaust - 22961 Arroyo Vista Rancho Santa Margarita, CA
92688
Main #: 1-800-990-0905 Technical Support: 1-800-959-9226 ext 4500
06/06/12
Rev: 000
RESONATOR
ASSY
MUFFLER
ASSY
MID-PIPE
ASSY
[2] 2.50"
CLAMP