G-Shock GBA-400-1A - Manual (Page 4)

Note
●
With G’MIX App, you can assign
the following functions to the
rotary switch:
volume level, select track, select
album, select artist, select
playlist, select effect, select
SOUNDER sound.
●
In the case of an iPhone, you
can control G’MIX App or the
standard iPhone Music app
from the watch. If you want to
control the standard iPhone
Music app from the watch,
perform the procedure below.
1. Remove G’MIX App from the
phone.
2. On the G-SHOCK+ top
screen, tap: “Music App
settings” n “Music”.
●
Certain music file types may not
be supported for playback with
G’MIX App.
Song Title Search
When there is music playing in your area,
you can use Song Title Search to find out
its title.
Important!
●
Your phone needs to have the
CASIO G’MIX App music app
installed to use this functions.
l
Music App Operations
Perform the procedure below when there
is no connection between the watch and
a phone.
1. X If the watch is connected with a
phone, hold down (B) for about 0.5
seconds to terminate the connection.
2. X On the watch, enter the
Timekeeping Mode and then quickly
rotate the rotary switch twice.
This will cause [SEARCH] to appear
on the display, indicating that search
has started.
●
If the song title search is
successful, the song title will
appear on the watch display.
Rotary switch
Song name
3. X Press any button other than (L) to
clear the song title from the display.
Note
●
The displayed song title can be
up to 17 alpha characters
(letters, numbers, symbols) or
five Japanese (katakana)
characters long.
●
[*CHECK App] will appear if
characters that are not
supported for display are
included or if there are multiple
titles for the song. If this
happens, use your phone to
check the song title.
●
[*FAILED] will appear if the song
title cannot be found.
●
This function is available only
while G-SHOCK+ and G’MIX
App are running on the phone.
Phone Finder
You can use phone finder to trigger a
tone on the phone to make it easy to find.
The tone is forced to sound even if the
phone is in the manner mode.
●
This function is available only while G-
SHOCK+ is running on the phone.
Important!
●
Do not use this function in areas
where phone call tones are
restricted.
●
The tone sounds at a high
volume. Do not use this function
when listening to phone output
over earphones.
1. X If the watch is connected with a
phone, hold down (B) for about 0.5
seconds to terminate the connection.
2. X In the Timekeeping Mode, hold
down the (D) button for about one
second.
This will display the watch screen
shown below and cause the tone to
sound on the phone.
●
It will take a few seconds before
the phone tone sounds.
3. X Press any button to stop the tone.
●
You can press any watch button to
stop the phone tone only during
the first 30 seconds after it starts to
sound.
Operation Guide 5413
4