Epson Artisan 810 Series - Manual (Page 6)

6 Using the Control Panel
Charging USB Devices
You can charge your cell phone, MP3 player, or other portable device by
connecting it to the Artisan 810 Series. All you need is a user-supplied USB cable
that’s designed to work with your device (one may have come with it).
Caution:
Make sure your portable device complies with USB 2.0 standards. Devices that draw
more than 500 mA may damage your Epson product. Epson cannot guarantee the
compatibility of your device. Contact the manufacturer of your device for more
information.
1. Turn on your Artisan 810 Series.
2. Connect your portable device to the USB port on the front of your
Artisan 810 Series.
3. Leave your Artisan 810 Series on while charging (it will continue to charge
even after going into sleep mode).
Note:
You cannot use the
USB port to transfer images from your portable device to
your computer. If you want to transfer images, use the memory card slots instead (see
the online Epson Information Center for instructions).