Epson Artisan 810 Series - Manual (Page 39)

Two-sided Printing 39
Mac OS X
Follow the Macintosh printing instructions beginning on page 33 (Mac OS X
10.5) or page 35 (Mac OS X 10.3 and 10.4), but complete the additional steps
below before you start printing.
1. Select 2-sided Printing Settings from the pop-up menu.
2. Select 2-sided Printing .
Note:
If you see a message indicating that the auto duplexer is not installed, open
EPSON Printer Utility3 (in the Applications folder on your hard drive), select your
Artisan 810 Series, click OK, click the Printer and Option Information button, and
click OK again. Then close and reopen the print window.
3. If you’re printing on plain paper and you notice that ink smears or bleeds
through the page, you may need to reduce the print density and increase the
ink drying time.
Pop-up menu
Click here