NEC SV8100 - Manual (Page 49)

43
ACCOUNT CODE ENTRY
To enter an Account Code any time while on a trunk
call:
The outside caller cannot hear the Account Code digits
you enter. You can use this procedure if your system
has Optional Account Codes enabled. You may also be
able to use this procedure for incoming calls.
1. Dial *.
-OR-
Press your Account Code key
(Service Code 851:Code 50).
2. Dial your Account Code (1~16 digits, using 0~9 and
#).
Note: If Account Codes are hidden, each digit you
dial shows as a “*” character on the
telephone’s display.
3. Dial *.
-OR-
Press your Account Code key
(Service Code 851:Code 50).
To enter an Account Code before dialing the outside
number:
If your system has Forced Account Codes, you must
use this procedure. If it has Verified Account Codes,
you can use this procedure instead of letting the system
prompt you for your Account Code. You may also use
this procedure if your system has Optional Account
Codes. If your system has Verified Account Codes
enabled, be sure to choose a code programmed into
your Verified Account Code list.
1. Access trunk for outside call.
Note: You can access a trunk by pressing a Line key
or dialing a code (except 9).
2. Dial *.
-OR-
Press your Account Code key (Service Code
851:Code 50).
3. Dial your Account Code (1~16 digits, using 0~9 and
#).
Note: If you make an incorrect entry, your
system may automatically alert the
operator. If Account Codes are hidden,
each digit you dial will show as a “*”
character on the telephone’s display.
Enter Account Code
LINE 001
Conf Rpt Sav Trf