Xblue Networks X-25 User Manual
Page 115
System Log
The system log is used to verify and diagnose networks settings and errors. There are several different levels
of system logs from, “Informational to Critical”. Generally, a technical support engineer will ask you to enable
this parameter for troubleshooting.
Select “System Confi guration Log” to select the level of logging required. Then select, “Enable” and Apply to
begin logging.
Note: Enabling the System Log, in Debugging mode, may cause the system to operate erratically.
This parameter should only be enabled when asked to do so by a technical support Engineer.
115
“Wireless Local Area Network (WLAN)”