WebDT DT395GS User Manual
Page 2
DT395GS
ENGLISH
2
Button Functions
BUTTON ACTION
Programmable
Power on,
Push/release typically enters Standby mode, or Push/release exits Standby mode or
restarts (software dependent)
Push and hold (over 4 seconds) invokes hardware shutdown
The DT395GS
Battery/Power LED
Wireless LED
1
1
2
2
Input/ Output Ports
Wireless Switch
Headphone Jack
USB Port
DC Power Input
SD Card Reader
A
C
D
E
B
A
B
C
D
E
Battery and Power Management
The DT395GS is equipped with an internal Li-Ion battery pack and an optional battery
pack that clips (hot-pluggable) onto the back of the tablet. The period between battery
recharges can be significantly lengthened by putting the tablet into Standby mode
through the Power Button (see Buttons Function Table) whenever the tablet is not in
use. Depending on the operating software, the DT395GS may also be configured to enter
various power-saving modes via the Power Button or through timed entry.
Full Slot SD Card Reader
The DT395GS comes with a full slot SD card reader.
Remove the rubber cover and insert a SD card (Picture 1).
•
Push, release and remove the card (Picture 2).
•
(Picture 1)
(Picture 2)
3
ENGLISH