WebDT DT391GS User Manual

Page 4

DT391GS

ENGLISH

Bluetooth

The Bluetooth conﬁguration application is enabled from the System Tray or from the
Windows Mobility Center. Follow the instructions and options provided within the appli-
cation to conﬁgure and invoke Bluetooth connectivity with the corresponding peripherals.

USING THE MOBILE TABLET

Peripherals Support

Through its USB ports, the DT391GS supports a wide range of USB-based peripherals.
These peripherals are applicable for software installation, applications storage, data
storage, and system software recovery and updates.

Remote Management

Depending on software conﬁguration, the DT391GS can be centrally managed for asset
monitoring and for software control. Please consult your device provider.

Insert the Micro SD and SIM Cards

1. Remove the battery pack, and then unscrew the four screws from the cap (Image 1).

2. Remove the cap, you will see the Micro SD and SIM Card slots (Image 2). Insert the
Micro SD and SIM cards properly.

(Image 1)

(Image 2)

NOTE

The 3G module is optional to DT391 series. The SIM card slot will be only functioned
with the 3G module.

ENGLISH

To Hold the Tablet

Left hand: grip the left back side of the tablet
with your left hand four index ﬁngers, with thumb
resting on the top of the back side of the tablet
and palm securely against the back.
Right hand: grip the right back side of the tablet
with your right hand four index ﬁngers, with
thumb resting on the top of the back side of the
tablet and palm securely against the back.

For More Support

Users can download the Tablet Modules Basic Operation Guides from the DT Research
website.