WebDT DT313C/ DT313H - Manual (Page 4)

DT313C/ DT313C-MD/ DT313H/ DT313H-MD
ENGLISH 6
Bluetooth
The DT313C/ DT313C-MD/ DT313H/ DT313H-MD is with the Bluetooth module
supporting Bluetooth 4.0 standard including Bluetooth 3.0 High Speed and Bluetooth
4.0 Low Energy (BLE), which delivers faster speeds (up to 300 Mbps) with low power
consumption.
Desktop Cradle
The DT313C/ DT313C-MD/ DT313H/ DT313H-MD is complemented by an optional
Desktop Cradle for support, pass-through charging, Video-out, and connection to a
range of USB peripherals. The Cradle offers the following interfaces: a DC-in port for the
AC-DC adapter, two DisplayPort outputs to support dual monitor display, an Ethernet
port and USB ports. Always seat the DT313C/ DT313C-MD/ DT313H/ DT313H-MD
securely onto the cradle. The cradle must be powered by the AC-DC adapter for the
Ethernet and USB ports to function. The battery packs on the DT313C/ DT313C-MD/
DT313H/ DT313H-MD may be recharged by connecting the AC-DC adapter directly to
the DC-in port on the DT313C/ DT313C-MD/ DT313H/ DT313H-MD or through the DC-in
port on the Desktop Cradle while the DT313C/ DT313C-MD/ DT313H/ DT313H-MD is
docked to the Cradle.
USING THE MOBILE TABLET
Peripherals Support
Through its USB port, the DT313C/ DT313C-MD/ DT313H/ DT313H-MD supports a
wide range of USB-based peripherals. These peripherals are applicable for software
installation, applications storage, data storage, and system software recovery and
updates. DT313C/ DT313C-MD/ DT313H/ DT313H-MD is also compatible with custom
mountable cradle options. These securable and mountable cradles provide an interface
to VESA mounts and arms, and to ports that may include USB, Ethernet, and pass-
through power.
Remote Management
Depending on software configuration, the DT313C/ DT313C-MD/ DT313H/ DT313H-MD
can be centrally managed for asset monitoring and for software control. Please consult
your device provider.
For More Support
Users can download the Tablet Modules Basic Operation Guides from the DT Research
website.
7 ENGLISH
To Hold the Tablet
Left hand: grip the left back side of the tablet
with your left hand four index fingers, with thumb
resting on the top of the back side of the tablet
and palm securely against the back.
Right hand: grip the right back side of the tablet
with your right hand four index fingers, with
thumb resting on the top of the back side of the
tablet and palm securely against the back.