General safety guidelines, Suitable operating conditions, Power supply – Waldorf Pulse 2 User Manual
Page 9: Operation
Introduction
9
Pulse 2 User Manual
General Safety Guidelines
m
Please read the following safety tips carefully!
They include several precautions you should al-
ways observe when dealing with electronic
equipment. Read all of the instructions before
operating your device
Suitable Operating Conditions
•
Use the device indoors only. Outside it could be
rainy or humid as well as too hot or too cold.
•
Never use the device under damp conditions such
as in bathrooms, washrooms or around indoor
swimming pools.
•
Do not use the device in extremely dusty or dirty
environments in order maintain the surface fi-
nishing of the Pulse 2.
•
Make sure that adequate ventilation is available on
all sides of the device. Do not place the device ne-
ar heat sources such as radiators.
•
Do not expose the device to direct sunlight, even if
you have a suitable sunscreen.
•
Do not expose the device to extreme vibrations.
Power Supply
• Never use a different power cable than the one that
came with the Pulse 2.
• Unplug the device when you are not using it for
longer periods.
• Never touch the plug with wet hands.
• Always pull the plug when unplugging the device,
never the cable.
Operation
• This device, used on its own or with amplifiers,
speakers or headphones, can generate volume levels
that may result in irreparable damage to your hea-
ring and/or speakers and amplifiers. For this reason
you should always keep the volume at appropriate
levels.
• Never place objects containing liquids on or near
the device.
• Always place the device on a stable base only.
• Make sure no foreign objects find their way into the
chassis. If for some reason this should occur, switch