Waldorf Pulse 2 - Manual (Page 11)

Setup and Connection
11 Pulse 2 User Manual
Setup and Connection
Inventory
The Waldorf Pulse 2 package comes complete with:
• the Waldorf Pulse 2 Synthesizer
• an external power supply with 12V / 500mA
• a printed Quick Start manual
Please ensure all the items above were included. If
something is missing, contact your local dealer.
We recommend that you save the original packing ma-
terial for future transport.
Setup
Place the Pulse 2 on a clean, even surface.
Connections
In order to get started with your Pulse 2 you will need
an AC power outlet. For the connection of the audio
output you will need either a mixing console or an
audio interface. You can also use a suited headphone.
Last but not least you will mostly likely need a MIDI
master keyboard.
You can also use a computer or hardware sequencer to
make use of the Pulse 2 MIDI features.
+
To connect the devices:
1. Turn all units off.
2. Connect the Pulse 2 audio output 2 to your
mixing console or your computer audio inter-
face. Optionally connect a suited stereo
headphone to the Pulse 2´s headphone output
1
. If you want to use a mono output only,
connect only the Stereo Out Right/Mono out-
put only with a ¼ inch mono plug.
3. To play the Pulse 2 you need a MIDI master
keyboard. Connect its MIDI Out jack to the
Pulse 2´s MIDI input 6.
4. If you want to use a computer with a MIDI in-
terface, connect your interface´s MIDI Out jack
to the Pulse 2 MIDI In jack 6.
5. Optionally you can connect the Pulse 2 USB
port 8 with a USB cable to your computer. Af-