Waldorf Blofeld Keyboard - Manual (Page 75)

Sound Parameter
75 Blofeld User´s Manual
Octave 1...10
Determines the range of the single notes in octaves. When
it is set to 1 Oct, the note list will be played back in the
same octave as originally entered Greater values mean
that the note list is repeated in higher or lower octaves.
The octave in which the arpeggio starts is determined by
the Direction parameter. If you play notes that span more
than one octave, they are still kept in the note list and
played back before the note list is transposed. The
following table shows some possible arpeggios:
Note input Range Direction Resulting Arpeggio
C1 E1 G1 1 Oct Up C1 E1 G1 | C1 E1
G1
C1 E1 G1 2 Oct Up C1 E1 G1 | C2 E2
G2 | C1 E1 G1 | C2
E1 G1 C1 3 Oct Up E1 G1 C1 | E2 G2
C2 | E3 G3 C3 | E1
C1 G1 E2 3 Oct Up C1 G1 E2 | C2 G2
E3 | C3 G3 E4 | C1
C1 E1 G1 3 Oct Down G3 E3 C3 | G2 E2
C2 | G1 E1 C1 | G3
C1 E1 G1 2 Oct Alt Down G2 E2 C2 | G1 E1 |
C1 E1 G1 | C2 E2
Arpeggio results depending on note input
Length 1/96…48 bars / Legato
Sets the length of the generated arpeggio notes. However,
when Length is set to legato, all arpeggio notes are
played without pauses between each step and
Arpegiator Length
therefore has no effect.
Overlap on / off
Due to the various Length parameters, it might happen
that two notes having equal pitch overlap, e.g. when you