Waldorf Blofeld Keyboard - Manual (Page 18)

Basic Operation
Blofeld User´s Manual 18
Basic Operation
Switching on/ off
The Blofeld ist equipped with a power switch.
☞
To switch the Blofeld on
• Flick the Power switch 6 to switch on the
Blofeld. The display is lit.
☞
To switch the Blofeld off:
• Flick the Power switch 6 to switch off the
Blofeld.
System Volume
The System Volume d controls the Blofeld’s master
volume. The volume setting is global and affects the level
of the audio output 4 and the headphone output 5.
Selecting Programs
Use the Selection dial c to select the sound programs
of the Blofeld.
☞
To select a Program with the Selection dial c:
• Make sure that the Play Sound mode is shown in
the display a. If not, press the Play button c
shortly.
• Use the Selection dial c to select an
appropriate Program. Turning the dial clockwise
increases the Program number, turning the dial
counterclockwise decreases it. When you are at
the end of one Bank and turn the Selection dial
further, you will jump to the beginning of the
next Bank and vice versa. The only exceptions
are the first Program in the first Bank (A001) and
the last Program in the last Bank.
• The display shows the bank number first (A, B,
C,...), after that program number (001 to 128)
and then the name of the selected Program.
Fast Selection of Sound Banks
In Play mode the Banks can be changed quickly by using
the left Display parameter dial e. Turning the knob
clockwise raises the bank number, turning counterwise
lowers it.