Waldorf Blofeld Keyboard - Manual (Page 71)

Sound Parameter
71 Blofeld User´s Manual
metal or tile wall. Higher settings make a warm and thick
reverb as if the signal were reflected by a uneven surface.
Settings above 100 change the room characteristic even
further.
Size 0...127
Determines the length of the longest room side in meters.
Lower settings simulate a normal room while higher
settings simulate a big hall or church.
Shape 0...127
Changes the characteristic of the reverb. In most effect
units you can select different rooms and reverb types like
plate or echo chamber. The Shape parameter enables
stepless changes of these reverb types. Lower settings
simulate a more natural reverb while higher settings
simulate a plate reverb.
Decay 0…127
Determines the length of the reverb reflections. To
simulate a big room choose higher Decay settings, to
simulate a smaller room choose lower settings.
Damping 0…127
Determines how fast the room simulation dampens the
higher reverb frequencies. Higher frequencies are not
dampened not as much as lower frequencies. This
phenomenon makes a natural echo sound somewhat
hollow. Higher values of the Damping parameter mean
more high frequencies will be dampened.