Vortech 2005-2009 Ford 4.6L 3V Mustang GT Air-Air Cooler - Manual (Page 2)

P/N: 8N020-160
© 2008 Vortech Engineering
All Rights Reserved, Intl. Copr. Secured.
29DEC08v1.0(8N020-160v1.0)
ii
FOREWORD
Take note of the following before proceeding:
1. Proper installation of this supercharger kit requires general
automotive mechanic knowledge and experience. Please browse
through each step of this instruction manual prior to beginning the
installation to determine if you should refer the job to a professional
installer/technician. Please contact your dealer or Vortech Engineering for
possible installers in your area.
2. This product was designed for use on stock (un-modified, OEM) vehi-
cles. The PCM (computer), engine, transmission, drive axle ratios and
tire O.D. must be stock. If the vehicle or engine has been modified in any
way, check with Vortech prior to installation and use of this product.
3. Use only premium grade fuel with a minimum of 91 octane (R+M/2).
4. Always listen for any sign of detonatlion (knocking/pinging) and discontinue
hard use (no boost) until the problem is resolved.
5. Vortech is not responsible for any clutch, transmission, drive-line or engine
damage.
Exclusions from Vortech warranty coverage consider-
ations include, but not limited to:
1. Neglect, abuse, lack of maintenance, abnormal operation or improper
installation.
2. Continued operation with an impaired vehicle or sub-system.
3. The combined use of Vortech components with other modifications such
as, but not limited to, exhaust headers, aftermarket camshafts, nitrous
oxide, third party PCM programming or other such changes.
©2008 VORTECH ENGINEERING, LLC
All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, or trans-
lated into another language in any form, by any means without written permission of Vortech
Engineering, LLC.
This manual provides information on the installation, maintenance and service of
the Vortech supercharger kit expressly designed for this vehicle. All information,
illustrations and specifications contained herein are based on the latest product
information available at the time of this publication. Changes to the manual may be
made at any time without notice. Contact Vortech Engineering for any additional
information regarding this kit and any of these modifications at (805) 247-0226
8:00am-4:30pm PST.
STOP