Vortech 1997-2004 C5 Corvette - Manual (Page 32)

P/N: 4GR020-010 v1.7, 2009-11-25
©2009 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured
20
A. Connect the supplied 3-1/2" length of Ø1"
hose from the barb on the supercharger dis-
charge duct to the inlet of the bypass valve.
(See Fig. 14-a.)
B. Attach the short leg of the molded 1" x 90°
hose to the bypass valve discharge and point
it up to where it will attach to the plastic air
inlet duct.
C. Tighten the hose clamps on each connection.
D. Cut brake booster vacuum hose as shown
(see Fig. 14-b) and insert the supplied plastic
TEE fitting.
E. Connect 5/32" vacuum line from the bypass
valve to the installed TEE fitting.
15. SUPERCHARGER BYPASS VALVE INSTALLATION
Fig. 14-a
5/32” HOSE 1/2” TEE
1/4” NPT x 3/16” FITTING
SUPERCHARGER
DISCHARGE TUBE
BRAKE BOOSTER
BYPASS VALVE
SUPERCHARGER
AIR INLET ELBOW
Fig. 14-b