Foreword – Vortech Universal Small Block Chevy Carbureted User Manual
Page 2

P/N: 4GP020-015 v3.0, 2012-03-26
©2012 Vortech Engineering, Inc.
All Rights Reserved, Intl. Copr. Secured
ii
FOREWORD
Take note of the following before proceeding:
1. Proper installation of this supercharger kit requires general automotive mechanic knowl-
edge and experience. Please browse through each step of this instruction manual prior
to beginning the installation to determine if you should refer the job to a professional
installer/technician. Please contact your dealer or Vortech Engineering for possible
installers in your area.
2. This product was designed for use on stock (un-modified, OEM) vehicles. The PCM
(computer), engine, transmission, drive axle ratios and tire O.D. must be stock. If the
vehicle or engine has been modified in any way, check with Vortech prior to installation
and use of this product.
3. Use only premium grade fuel with a minimum of 91 octane (R+M/2).
4. Always listen for any sign of detonation (knocking/pinging) and discontinue hard use
(no boost) until problem is resolved.
5. Vortech is not responsible for any clutch, transmission, drive-line or engine damage.
Exclusions from Vortech warranty coverage considerations include, but not limited to:
1. Neglect, abuse, lack of maintenance, abnormal operation or improper installation.
2. Continued operation with an impaired vehicle or sub-system.
3. The combined use of Vortech components with other modifications such as, but not limit-
ed to, exhaust headers, aftermarket camshafts, nitrous oxide, third party PCM program-
ming or other such changes.
©2012 VORTECH ENGINEERING, INC
All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, or translated
into another language in any form, by any means without written permission of Vortech Engineering, INC.
T
his manual provides information on the installation, maintenance and service of the
Vortech supercharger kit expressly designed for this vehicle. All information, illustra-
tions and specifications contained herein are based on the latest product information
available at the time of this publication. Changes to the manual may be made at any time
without notice. Contact Vortech Engineering for any additional information regarding this kit
and any of these modifications at (805) 247-0226 8:00am-4:30pm PST.