Vortech Universal Small Block Chevy Carbureted User Manual

Page 14

P/N: 4GP020-015 v3.0, 2012-03-26

D. dual-Plate Applications Only:

1. Locate the supplied steel supercharger

mounting plate. Attach the plate to the

cast aluminum mounting bracket with

the two supplied 3/8-16 x 1” screws in

the locations shown in Fig 4.1-c. Do

not tighten the screws at this time.

They will be removed in a future step.

Leave finger tight.

2. Place the supercharger into position on

the steel supercharger mounting plate.

Lightly “snug” the two supplied 3/8-16 x

1” screws (with washers) into the super-

charger at the locations shown in Fig

4.1-c. Do not tighten the screws at this

time. Leave finger tight.

3. Locate the supplied aluminum super-

charger mounting plate. Loosely attach

the plate to the supercharger and

bracket assembly using five of the sup-

plied 3/8-16 x 2.75” screws (with wash-

ers) and 1.434” long spacers.

Sandwich the spacers between the two

mounting plates.

4. Remove the two 3/8-16 x 1” screws that

were temporarily installed into the

bracket in a previous step. Attach the

two remaining sets of 3/8-16 x 2.75”

screws (with washers) and 1.434” long

spacers. Tighten all hardware. (See

Fig. 4.1-d.).

4.1-d

4.1-c

4.1 MAIN BRACKET/SUPERCHARGER INSTALLATION (Serpentine), cont’d